Are you experiencing a clogged toilet and unsure what to do? Don't worry! With the right tools and techniques, you can unclog your toilet yourself, avoiding the need to pay for professional toilet repair services.

In this post, our expert plumbers – providers of the top clogged toilet repair services in Kennesaw  – will share 3 methods to fix a toilet that won't flush and share some tips to prevent toilet clogs from happening in future. 

Method 1: Use a Plunger

If you have a clogged toilet, the most effective tool is a plunger. We recommend every home has one, especially if you have a flange, as they are the most effective tool at unclogging toilets.

To use a plunger, insert it into the toilet bowl and gently push down to get rid of the air. Be careful not to push too hard, or you risk splashing yourself with unclean water. Once a solid seal has been achieved, vigorously push the plunger down and up while maintaining the seal. To break the air seal, pull the tool forcefully up. Repeat the instructions until the obstruction is cleared.

Method 2: Use a Toilet Snake

If the obstruction is deeper than the bowl itself, a toilet snake is the best tool for the job. You can buy one for approximately $25, and it's a one-time purchase that’s cheaper than paying for clogged toilet repair services. 

To use a toilet snake, insert the snake into the drain and turn it clockwise as you push it in. Keep pushing until you feel resistance, then turn the handle to break up the blockage. Pull out the snake and dispose of any debris caught on the end. Repeat this process until the drain flows freely. Once you've cleared the blockage, rinse the toilet with hot water and flush to remove any remaining debris. Remember to wear gloves and eye protection while using a drain snake.

A clothes hanger cannot be used as a replacement for a toilet snake, since it would harm the porcelain surface of the toilet bowl, resulting in the need for toilet repairs down the line. 

Method 3: Use Vinegar and Baking Soda